top of page

Group

Public·215 members
Liam Garcia
Liam Garcia

Swiftec V1.8.2 18: Features, Benefits and Installation Guide



Swiftec V1.8.2 18: The Most Advanced Chiptuning Software




If you are looking for a tool that can help you optimize the performance of your vehicle's engine, transmission, battery or other electronic modules, you might want to check out Swiftec V1.8.2 18, the latest version of the revolutionary chiptuning editing software developed by Swiftec Automotive Software.




swiftec v1.8.2 18



Swiftec is a software that allows you to edit the binary data of your vehicle's control modules, such as the ECU (Engine Control Unit), TCU (Transmission Control Unit), BMS (Battery Management System) or others, in order to modify parameters such as fuel injection, ignition timing, boost pressure, torque limiters, speed limiters, DPF (Diesel Particulate Filter) or EGR (Exhaust Gas Recirculation) systems, among many others.


By editing these parameters, you can achieve different goals, such as increasing the power and torque of your engine, improving the fuel efficiency and emissions of your vehicle, removing unwanted features or errors from your control modules, or customizing your vehicle to your personal preferences.


Swiftec is not only a powerful and versatile software, but also a user-friendly and accessible one. It has a modern and intuitive interface that makes it easy to navigate through the different options and features. It also has a huge database of predefined and automatic maps that help you identify and edit the relevant data in your files. Moreover, it has more than 35 automated modules that can perform complex tasks with just one click, such as DPF removal, EGR removal, DTC (Diagnostic Trouble Code) removal, checksum correction, map switching, launch control activation, and many more.


In this article, we will explain what are the main features and benefits of Swiftec V1.8.2 18, how to download and install it on your computer, and how to use it to edit your files.


What is Swiftec and why you need it




Swiftec is a software that allows you to edit the binary data of your vehicle's control modules in order to optimize their performance and functionality.


The binary data of your control modules are stored in files that can be read or written by special devices called programmers or flashers. These devices can connect to your vehicle's OBD (On-Board Diagnostics) port or directly to the control module's pins or sockets.


Once you have read the file from your control module using a programmer or flasher, you can open it with Swiftec and start editing it according to your needs or preferences.


You might need Swiftec for different reasons, such as:



  • You want to increase the power and torque of your engine by modifying parameters such as fuel injection, ignition timing, boost pressure or torque limiters.



  • You want to improve the fuel efficiency and emissions of your vehicle by modifying parameters such as lambda sensor values, injection duration or EGR system.



  • You want to remove unwanted features or errors from your control modules by modifying parameters such as speed limiters, DPF system or DTCs.



  • You want to customize your vehicle to your personal preferences by modifying parameters such as map switching, launch control or pop & bang.



Whatever your goal is, Swiftec can help you achieve it with its advanced features and benefits.


Swiftec features and benefits




Swiftec is a software that offers many features and benefits that make it stand out from other chiptuning editing software in the market. Here are some of them:


Friendly and modern interface




Swiftec has a friendly and modern interface that provides a seamless and enjoyable user experience. It is intuitive and accessible, allowing its users to quickly find what they need and navigate through the interface with ease.


The interface has four main sections: File Manager, Project Manager, Map Manager and Editor.



  • The File Manager allows you to open, save or close files from your computer or from online databases.



  • The Project Manager allows you to create or select projects for different vehicles or control modules.



  • The Map Manager allows you to view or edit the maps in your files using different modes: 2D mode (table), 3D mode (graph), HEX mode (hexadecimal) or MAP mode (map).



  • The Editor allows you to edit the values in your maps using different tools: calculator, copy & paste, fill & replace, interpolate & extrapolate or undo & redo.



Vehicles and control modules coverage




Swiftec has a great coverage of vehicles and control modules that makes it unbeatable and a must have tool for every workshop. The coverage is constantly increased taking in mind the evolving industry.


As a result, the users are able to provide wider services to their customers, increasing their potential for success and growth.


Swiftec supports vehicles from different categories: cars, trucks, motorbikes, tractors or boats. It also supports different types of engines: combustion engines (petrol or diesel), electric engines or hybrid engines.


Swiftec supports control modules from different manufacturers: Bosch, Delphi, Denso, 35+ automated "One Click" modules




One of the most brilliant parts of Swiftec is thousands and thousands of great and unique solutions, all are ready for you to apply and only with a "One Click" action.


These solutions are called modules and they can perform complex tasks that would otherwise require a lot of time and expertise to do manually. For example, you can remove the DPF system from your file with just one click, without having to search and edit dozens of maps related to it.


Swiftec has more than 35 modules available for different purposes, such as:



  • Soft Rev Limiter Removal Module: This module allows you to remove the soft rev limiter that reduces the power of your engine when it reaches a certain RPM.



  • A2L/DAMOS Import Module: This module allows you to import A2L or DAMOS files that contain map definitions for your files.



  • ADBLUE/SCR Removal Module: This module allows you to remove the ADBLUE/SCR system that reduces the NOx emissions of your vehicle.



  • AGS Removal Module: This module allows you to remove the AGS (Automatic Gearbox System) that shifts gears automatically for your vehicle.



  • BMS/BPCM Recovery Module: This module allows you to recover corrupted files from BMS (Battery Management System) or BPCM (Battery Pack Control Module) that control the battery of your vehicle.



  • Boost Sensor Calibration Module: This module allows you to calibrate the boost sensor that measures the pressure of your turbocharger or supercharger.



  • Burbles Activation Module: This module allows you to activate the burbles effect that produces popping sounds from your exhaust when you decelerate.



  • Checksum Detection Module: This module allows you to detect the checksum algorithm that protects your file from corruption.



  • Checksums Module: This module allows you to correct the checksum of your file after editing it.



  • Cold Start Noise Reduction Module: This module allows you to reduce the noise of your engine when you start it cold.



  • DPF Removal Module: This module allows you to remove the DPF (Diesel Particulate Filter) system that filters the soot particles from your exhaust.



  • DTC Removal Module: This module allows you to remove the DTC (Diagnostic Trouble Code) errors that are stored in your control module when something goes wrong.



  • ECU Information Detection Module: This module allows you to detect the information of your control module, such as manufacturer, model, version, hardware number or software number.



  • EGR Removal Module: This module allows you to remove the EGR (Exhaust Gas Recirculation) system that recirculates some of the exhaust gas back into the intake manifold to reduce NOx emissions.



  • EVAP Removal Module: This module allows you to remove the EVAP (Evaporative Emission Control) system that prevents fuel vapors from escaping into the atmosphere.



  • Exhaust Flap Removal Module: This module allows you to remove the exhaust flap that controls the sound of your exhaust by opening or closing a valve.



  • Flaps / Swirl Removal Module: This module allows you to remove the flaps or swirl valves that control the air flow into your intake manifold.



  • GPF/OPF Removal Module: This module allows you to remove the GPF (Gasoline Particulate Filter) or OPF (Otto Particulate Filter) system that filters the soot particles from your exhaust in gasoline engines.



  • Hot Start Fix Module: This module allows you to fix the problem of hard starting when your engine is hot.



  • IMMO Removal Module: This module allows you to remove the IMMO (Immobilizer) system that prevents your vehicle from starting without a valid key.



  • Kickdown Deactivation Module: This module allows you to deactivate the kickdown feature that shifts gears automatically when you press the accelerator pedal hard.



  • Lambda/O2 Removal Module: This module allows you to remove the lambda or O2 sensors that measure the oxygen level in your exhaust.



  • Launch Control Module: This module allows you to activate the launch control feature that helps you accelerate faster from a standstill.



  • LC, AL and NLS for MED9.1 Service: This module allows you to activate the launch control, anti-lag and no-lift shift features for MED9.1 ECUs.



  • MAF Removal Module: This module allows you to remove the MAF (Mass Air Flow) sensor that measures the air flow into your engine.



  • MAP Manager Module: This module allows you to manage the maps in your files using different tools: search, filter, sort, group, compare or export.



  • MAPS Detection Module: This module allows you to detect the maps in your files using different methods: checksum, address, size or pattern.



  • MAPS Recognition Module: This module allows you to recognize the maps in your files using our unique map recognition algorithm that compares your maps with our online database of predefined maps.



  • OBD Reading Protection Module: This module allows you to protect your files from being read by OBD devices.



  • Online Predefined Maps Database Module: This module allows you to access our online database of predefined maps that contains thousands of map definitions for different vehicles and control modules.



  • Popcorn Activation Module: This module allows you to activate the popcorn effect that produces banging sounds from your exhaust when you reach a certain RPM.



  • Readiness Calibration Module: This module allows you to calibrate the readiness status of your control module that indicates if it is ready for an emissions test.



  • Remote Update Module: This module allows you to update your Swiftec software remotely without having to download and install it manually.



  • SAP Removal Module: This module allows you to remove the SAP (Secondary Air Pump) system that injects air into the exhaust manifold to reduce emissions during cold start.



  • Speed Limiter Removal Module: This module allows you to remove the speed limiter that restricts the maximum speed of your vehicle.



  • Sport Displays Calibration Module: This module allows you to calibrate the sport displays that show the power and torque of your engine on your dashboard.



  • StartStop Disable Module: This module allows you to disable the start-stop feature that turns off your engine when you stop your vehicle to save fuel.



  • Torque Monitoring Disable Module: This module allows you to disable the torque monitoring feature that limits the torque of your engine when it detects a problem.



  • TVA Removal Module: This module allows you to remove the TVA (Throttle Valve Actuator) system that controls the throttle valve of your engine.



  • VAS Import Module: This module allows you to import VAS files that contain map definitions for your files.



How to download and install Swiftec V1.8.2 18




If you are interested in trying out Swiftec V1.8.2 18, you can download and install it on your computer following these steps:


Download link and requirements




You can download Swiftec V1.8.2 18 from the official website of Swiftec Automotive Software: https://www.swiftec.pt/


You will need a valid license and registration to use Swiftec V1.8.2 18. You can purchase a license and register online on the same website.


You will also need a compatible programmer or flasher device to read and write files from your control modules. You can find a list of supported devices on the website as well.


The minimum requirements for Swiftec V1.8.2 18 are:



  • Operating system: Windows XP, Vista, 7, 8 or 10



  • Processor: Intel Pentium 4 or higher



  • Memory: 512 MB RAM or higher



  • Disk space: 100 MB or higher



  • Internet connection: Required for activation, updates and online services



Installation steps




To install Swiftec V1.8.2 18 on your computer, follow these steps:



  • Download the setup file from the website and save it on your computer.



  • Run the setup file and follow the instructions on the screen.



  • Select the language and accept the terms and conditions.



  • Select the destination folder and click next.



  • Select the components and click next.



  • Select the start menu folder and click next.



  • Select additional tasks and click next.



  • Click install and wait for the installation to finish.



  • Click finish and launch Swiftec V1.8.2 18.



Activation and registration




To activate and register Swiftec V1.8.2 18, follow these steps:



  • Launch Swiftec V1.8.2 18 and enter your license number and password.



  • Click activate and wait for the activation process to complete.



  • If successful, you will see a message confirming your activation and registration.



  • If not successful, you will see an error message explaining the reason. You can contact Swiftec support for assistance if needed.



How to use Swiftec V1.8.2 18




To use Swiftec V1.8.2 18 to edit your files, follow these steps:


Open a file and select a project




To open a file with Swiftec V1.8.2 18, follow these steps:



  • Launch Swiftec V1.8.2 18 and click on File > Open or press Ctrl + O on your keyboard.



  • Browse your computer or online databases and select the file you want to open.



  • Click open and wait for Swiftec V1.8.2 18 to load the file.



To select a project for your file, follow these steps:



  • In Swiftec V1.8.2 18, click on Project > New or press Ctrl + N on your keyboard.



  • Select a vehicle category (car, truck, motorbike, tractor or boat) from the drop-down menu. Select a vehicle brand (e.g. Audi, BMW, Ford, etc.) from the drop-down menu.



  • Select a vehicle model (e.g. A3, X5, Focus, etc.) from the drop-down menu.



  • Select a vehicle engine (e.g. 1.6 TDI, 3.0 TFSI, 2.0 EcoBoost, etc.) from the drop-down menu.



  • Select a control module (e.g. EDC17C46, MED17.5.5, SID807EVO, etc.) from the drop-down menu.



  • Enter a project name and click OK.



Alternatively, you can use the ECU Information Detection Module to automatically detect the information of your control module and create a project for you.


Edit maps and apply modules




To edit maps in your file with Swiftec V1.8.2 18, follow these steps:



  • In Swiftec V1.8.2 18, click on Map > Maps Detection or press F9 on your keyboard.



  • Select a detection method (checksum, address, size or pattern) and click OK.



  • Wait for Swiftec V1.8.2 18 to detect the maps in your file and display them in the Map Manager section.



  • Select a map from the list and double-click on it to open it in the Editor section.



  • Choose a view mode (2D, 3D, HEX or MAP) and edit the values in your map using different tools: calculator, copy & paste, fill & replace, interpolate & extrapolate or undo & redo.



  • Repeat steps 4 and 5 for other maps you want to edit.



To apply modules to your file with Swiftec V1.8.2 18, follow these steps:



  • In Swiftec V1.8.2 18, click on Module > Select Module or press F10 on your keyboard.



  • Select a module from the list (e.g. DPF Removal Module, EGR Removal Module, Speed Limiter Removal Module, etc.) and click OK.



  • Wait for Swiftec V1.8.2 18 to apply the module to your file and display the results in the Editor section.



  • Check the results and make any adjustments if needed.



  • Repeat steps 2 to 4 for other modules you want to apply.



Save and write the file




To save your file with Swiftec V1.8.2 18, follow these steps:



  • In Swiftec V1.8.2 18, click on File > Save or press Ctrl + S on your keyboard.



  • Browse your computer and select a destination folder for your file.



  • Enter a file name and click save.



To write your file to your control module with Swiftec V1.8.2 18, follow these steps:



  • Connect your programmer or flasher device to your computer and to your vehicle's OBD port or control module's pins or sockets.



  • Launch your programmer or flasher software and select the write option.



  • Browse your computer and select the file you saved with Swiftec V1.8.2 18.



  • Follow the instructions on the screen and wait for the writing process to finish.



Conclusion and FAQs




In this article, we have explained what is Swiftec V1.8.2 18, what are its main features and benefits, how to download and install it on your computer, and how to use it to edit your files.


We hope you have found this article useful and informative. If you have any questions or doubts about Swiftec V1.8.2 18, you can contact us or visit our website for more information: https://www.swiftec.pt/


Here are some frequently asked questions about Swiftec V1.8.2 18:


What is the difference between Swiftec V1.8.2 18 and other chiptuning editing software?




Swiftec V1.8.2 18 is different from other chiptuning editing software in many ways:



  • It has a friendly and modern interface that provides a seamless and enjoyable user experience.



  • It has a great coverage of vehicles and control modules that makes it unbeatable and a must have tool for every workshop.



  • It has more than 35 automated modules that can perform complex tasks with just one click, such as DPF removal, EGR removal, DTC removal, checksum correction, map switching, launch control activation, and many more.



  • It has a unique map recognition algorithm that compares your maps with our online database of predefined maps and recognizes them automatically.



  • It has an online predefined maps database that contains thousands of map definitions for different vehicles and control modules.



How much does Swiftec V1.8.2 18 cost?




The price of Swiftec V1.8.2 18 depends on the license type and the modules you want to purchase:



The basic license of Swiftec V1.8.2 18 costs 1499 (excluding VAT) and includes: checksum detection module, checksums module, ECU information detection module, map manager module, maps detection module, maps recognition module, online predefined maps database module, remote update module, and one year of updates. The additional modules of Swiftec V1.8.2 18 cost 99 (excluding VAT) each and include: soft rev limiter removal module, A2L/DAMOS import module, ADBLUE/SCR removal module, AGS r


About

Welcome to the group! You can connect with other members, ge...

Members

Group Page: Groups_SingleGroup
bottom of page